Calculator directory

Find the right calculator for your project.

These tools calculate material quantities from measurements you provide. They do not determine structural design, code compliance, or installation requirements.

Find a calculator

30 calculators · US and metric measurements · No account needed

Railing layout

Work from a clear opening, post-centre runs, or the complete guard outline.

Baluster spacing

Balance a clear opening with equal gaps and a whole baluster count.

You’ll get: Gap, count, and centres

Railing posts

Lay out post locations and equal spans across straight or connected runs.

You’ll get: Posts, spans, and positions

Railing materials

Estimate posts, balusters, unspliced rail stock, waste, and optional cost.

You’ll get: Purchasable material list

Deck surfaces and finishes

Plan walking boards, exposed edges, grade-following skirting, and wood finish coverage. The finish tool also handles fence components.

Deck boards and fasteners

Plan board rows, stock, cuts, reusable offcuts, and fastener packages.

You’ll get: Boards and fasteners

Deck fascia stock and joints

Measure edges, returns and interruptions with supplied joints and physical stock cuts.

You’ll get: Fascia cuts, fasteners and remnants

Variable-height deck skirting

Record grade stations, access openings and panel seams; nest the physical sheet blanks.

You’ll get: Panel cuts and rectangular remnants

Outdoor wood exposed surfaces

Count selected faces and edges, blocked surfaces and label-based container purchases.

You’ll get: Exposed area and finish containers

Fences and gates

Choose a material system, then check post layout or a measured gate opening separately.

Wood fence materials

Estimate posts, boards or panels, rails, fasteners, caps, and entered gate materials.

You’ll get: Fence material takeoff

Chain-link materials

Estimate mesh rolls, top rail, posts, gates, tension wire, and optional concrete.

You’ll get: Primary shopping list

Selected vinyl fence system

Reconcile documented panels, post roles, gate kits and exact system parts.

You’ll get: System parts and source records

Fence posts

Count line, terminal, corner, and gate posts for a measured layout.

You’ll get: Post types and spacing

Gate opening and clearance

Record clear openings, selected hardware allowances, leaf sweeps, ground samples and obstacles.

You’ll get: Measured sweep and clearance worksheet

Concrete and aggregate

Take off supplied hole or slab geometry, compare fill orders, or count products for prescribed joints.

Concrete for post holes

Convert cylindrical post-hole measurements into volume and whole bags.

You’ll get: Volume, bags, and gravel

Concrete slab and supplied reinforcement

Reconcile measured thickness zones, forms, selected base and approved bar-mark schedules.

You’ll get: Slab volumes, forms and supplied bar cuts

Aggregate and fill supplier orders

Compare exact bag, volume and weight quotes, documented conversions, minimums and delivery.

You’ll get: Supplier receipts and order surplus

Concrete joint and crack sealant

Record measured joint groups, prescribed profiles, exact cartridge yield and selected backer rod.

You’ll get: Whole cartridges and rod packages

Yard and landscape

Measure a footprint, count patio or bed materials, transcribe wall courses, or take off an already-designed ordinary yard drain.

Irregular footprint measurement

Record convex corners or measured triangles, exclusions, checks and area uncertainty.

You’ll get: Measured area and uncertainty range

Paver patio materials

Estimate pavers, layers, joint products, edge restraint, spikes, fabric, and packages.

You’ll get: Patio material takeoff

Raised-bed frames and fill

Use selected corner assemblies and actual boards for multiple beds, physical cuts and inside fill.

You’ll get: Frame cuts, fasteners and soil purchases

Selected retaining-wall courses

Count straight and stepped courses from a supplied design, documented patterns and cap joints.

You’ll get: Course mix, caps and entered materials

French drain grade and materials

Sketch optional station depths and estimate gravel, pipe stock, fittings, and fabric for a planned yard trench.

You’ll get: Depth profile and material takeoff

Shed and roof

Compare shed support paths, check equipment entry geometry, or count covering across measured roof planes.

Shed foundation chooser

Compare a pad, slab, piers, blocks, or skids, then sketch the selected takeoff.

You’ll get: System plan and primary materials

Shed equipment entry and ramp fit

Compare measured doorway, equipment and selected ramp profiles with sampled interference checks.

You’ll get: Measurement and profile worksheet

Multi-plane roof takeoff

Compare shingle and metal-panel quantities across pitched roof planes.

You’ll get: Plane areas and shopping list

Interior finishes and insulation

Lay out drywall on measured surfaces or plan an insulation layer from climate and existing R.

Drywall sheet layout

Place sheets on individual walls or a room, mark opening cuts, and plan finishing supplies.

You’ll get: Board map and cut list

Climate and R-value planner

Compare sourced R guidance, size the gap, and count labeled batt or blown-in packages.

You’ll get: Depth and package plan

Stair layout

Reconcile whole risers, treads, and a reviewed stringer profile before planning stock.

Stair and stringer planner

Draw step geometry and cut coordinates; hold materials until project criteria and geometry pass review.

You’ll get: Preliminary stringer layout

Construction measurement

Measure surface coverage and bulk layers before choosing material orders.

Cubic Yard Calculator

Add measured bulk-material sections in feet/inches, yards or metres and compare cubic feet, cubic yards and cubic metres without hidden allowances.

You’ll get: Cubic feet, yards and metres

Gravel Calculator

Measure driveway, shed-base, patio, walkway or fill sections, add optional extra volume, and estimate pounds and short tons using your entered density.

You’ll get: Volume and estimated short tons

Construction Square Footage Calculator

Measure room, deck, patio, lot and irregular construction coverage with rectangles, triangles, circles and trapezoids, keeping gross, excluded and net area separate.

You’ll get: Gross, excluded and net area

Not sure what to measure?

Start with the field guide for your project, then return with a checked sketch and the selected product record.

Browse measurement guides